Cleaning robots / AR-Pro
AR-Pro
The mid-size scrubber-dryer that does the broad acreage every night — offices, malls, schools and warehouses from 1,000 to 10,000 m². Built on vetted Allybot C2 / C2 Pro hardware, supported in Australia.
AR-Pro · Allybot C2 / C2 Pro class
One machine, the whole floor, every night.
The AR-Pro is the tier most sites start with. It sweeps, scrubs and dries hard floors in a single pass, maps your space with 2D LiDAR, dodges people and pallets with ultrasonic and camera sensing, and returns to its dock to recharge and swap water on its own.
Your cleaner stops pushing a machine for three hours and starts supervising a fleet — checking reports, handling the detail work, and covering more sites in the same shift. That's the shift that makes the economics work.
- Sweep, scrub and dry in one autonomous pass
- 2D LiDAR mapping with no-go zones you control
- Ultrasonic + RGB obstacle avoidance around people
- Auto-dock, auto-charge, auto water exchange
- Remote fleet health and coverage reporting
- 12-month Australian warranty + local parts
Full specifications.
From the manufacturer datasheet for the Allybot C2 / C2 Pro class. Exact figures depend on the configuration we specify for your site.
| Coverage area | 1,000–10,000 m² |
|---|---|
| Cleaning rate | 500–1,200 m²/h |
| Cleaning modes | Sweep · scrub · vacuum · dry |
| Cleaning width | 440 mm scrub / 560 mm vacuum |
| Suction | Up to 20 kPa |
| Clean / recovery tank | 10 L / 10 L |
| Max gradient | Up to 7° |
| Noise | ≤ 65 dB |
| Navigation | 2D LiDAR + 6-axis IMU + ultrasonic + RGB camera |
|---|---|
| Battery | 25.6 V LiFePO₄ |
| Runtime | Up to a full overnight shift (config dependent) |
| Dimensions | 503×503×629 mm to 571×505×698 mm |
| Weight | 42–55 kg |
| Docking | Auto-return, auto-charge, auto water exchange |
| Ingress rating | IP33 / IP34 |
| Certifications | CE · FCC · CB · UKCA · TELEC · UN38.3 · RCM pathway |
Built for mixed mid-size floors.
Shopping centres
Concourse and common-area hard floors cleaned overnight, with coverage proof for the centre manager.
Corporate & FM
Consistent nightly cleaning across floor plates without chasing a night cleaner.
Schools & campuses
Large corridors and halls on a fixed budget, with holiday-period deep cleans.
Warehouses
Open hard floors and aisles maintained between shifts without diverting staff.
It pays back inside the first year.
Against a single overnight shift, an AR-Pro on outright purchase pays for itself well inside twelve months. On RaaS, you skip the capex entirely and compare a monthly figure to a weekly wage.
See full pricing & RaaS| Outright purchase | Figure |
|---|---|
| Landed cost | ~A$12,500 |
| Sell price | A$15,900 |
| Install + training | A$1,200 |
| RaaS alternative | A$449/mo · 36 mo |
| Buyer's alternative | One cleaner ≈ $55k+/yr |
AR-Pro, answered.
No — and we won't tell you it does. The AR-Pro does the broad floor acreage so your cleaner supervises it and focuses on edges, restrooms and detail. One person can now cover more area, which is where the savings come from.
The 25.6 V LiFePO₄ pack is specified to cover a typical overnight shift, and the robot auto-returns to dock to recharge and exchange water on its own. Exact runtime depends on floor type, soiling and the configuration we set for your site.
Yes. It navigates with 2D LiDAR and avoids obstacles using ultrasonic and camera sensing, with no-go zones you define. We also set it up with a WHS approach for autonomous machines working in occupied spaces as part of installation.
It ships with a 12-month Australian warranty. We hold pads, brushes, batteries and filters in local stock and target a 48-hour callout. You're not waiting six weeks for a part from overseas.
That's how we prefer to sell. We bring a unit to your site and run it on your floor, then leave one for a real trial period. The machine makes the case better than we can.